Static Compactors
About Static Compactors
A waste compactor is designed to compress and minimise the volume of waste material. Used commercially for non-recyclable waste with hydraulic pressure. A compactor can manage cardboard, paper, plastic, aluminium, food waste among other general waste.
Compacted waste reduces the number of collections required from waste collection services and increases the volume that can be collected on each occasion.
Call, email or enquire via our free waste audit form to contact a waste specialist from Waste Handling Solutions to find out more or arrange a free waste audit.
Looking for Portable Compactors?
If you are dealing with wet waste then our portable compactor maybe more suited to your needs.
Our Static Compactors
The differences between the static compactors are the size and the speed. The three styles of static compactors are shown below followed by the specification table of each model comparatively.
WHS Cubic Metre Compactor Units
| Specification | 2.0 | 2.5 | 3.0 |
|---|---|---|---|
| Load aperture (mm) | 1430 x 1200 | 1500 x 1270 | 1500 x 1800 |
| Cycle time (seconds) | 45 | 45 | 60 ~ 84 |
| Charge box volume including hopper (m³) | 2.0 | 2.5 | 3.0 |
| Ram penetration (mm) | 300 | 400 | 400 |
| Compaction force (tonnes) | 28 | 32 | 38 |
| CHEM1 volume per stroke (m³) | 1.37 | 1.90 | 2.70 |
| CHEM1 volume per hour (m³) | 110 | 152 | 121 – 162 |
| Motor rating (KW) | 7.5 | 7.5 | 7.5 / 11 |
| Power requirements (phase / Amp) | 3 / 32 | 3 / 32 | 3 / 32 |
| Weight (tonnes) | 4.2 | 4.5 | 5.2 |
- Chem – “Container handling equipment manufacturers” standard.
- BS EN12574-2 – Standard for stationary waste containers performance requirements and test methods.
Call, email or enquire via our free waste audit form to contact a waste specialist from Waste Handling Solutions to find out more or arrange a free waste audit.
Examples of Static Compactors
The following are a range of static compactors we offer, in-situ and in use.
Static Compactor Feed Options
You can feed your static compactors in a number of ways, these include the following.
- Chute Feed
- Fork Lift / Grab feed splayed hoppers
- Hand Feed from both side (with / without trip bars – dependent on height to comply with health and safety regulation)
- Over the rear bin lift system, with safety cage (dock or ground level lifter)
- Over the side bin lift system with safety cage (dock or ground level lifter)
- Pneumatic (air driven) feed system
- Worm Screw feed (e.g. from de-watering plant)
Call, email or enquire via our free waste audit form to contact a waste specialist from Waste Handling Solutions to find out more or arrange a free waste audit.
Over the side bin lift with safety cage
Available as dock or ground level lifter.
Hand fed from rear
Available both sides with or without trip bars (dependent on height to comply with health and safety regulation).
Pneumatic (air driven) feed system
Chute Feed
Over the rear bin inside pod
Trouser leg feed system
Static Compactor In Use
Call, email or enquire via our free waste audit form to contact a waste specialist from Waste Handling Solutions to find out more or arrange a free waste audit.